Elko eLAN-RF-003 Instrukcja Obsługi Pobierz pdf (Strona 38)

60mm

21mm

RFSAI - 61B

RFSAI-61B

L N

Supply voltage:

Apparent power:

Dissipated power:

Supply voltage tolerance:

Output

Number of contacts:

Rated current:

Switching power:

Peak current:

Switching voltage:

Min. switching power DC:

Mechanical service life:

Electrical service life (AC1):

Controlling

RF command from the transmitter:

Manual control:

External button:

Range in open space:

Further data

Voltage of open contact:

Resist. of connection for closed

contact:

Resist. of connection for open

contact:

Galvanic isolation of input:

Operating temperature:

Working position:

Mounting:

Protection:

Overvoltage category:

Contamination degree:

Terminals (CY wire, Cross-section):

Terminal length:

Dimensions:

Weight:

Related standards:

230 V AC / 50 - 60 Hz

7 VA / cos φ = 0.1

0.7 W

+10 %; -15 %

1x switching (AgSnO

)

16 A / AC1

4000 VA / AC1, 384 W / DC

30 A / <3 s

250 V AC1 / 24 V DC

500 mW

3x10

0.7x10

868 MHz

button PROG (ON/OFF)

max. 12 m cable

up to 200 m

<1 kΩ

>10 kΩ

-15 up to + 50 °C

any *

free at lead-in wires

IP 30

III.

2x 0.75 mm

, 2x 2.5 mm

90 mm

49 x 49 x 21 mm

46 g

EN 60669, EN 300 220, EN 301 489

directive RTTE, NVč.426/2000Sb (directive 1999/ES)

Technical parameters

Functions and their programming

The output contact will close by

pressing the button and open by

releasing the button.

The output contact will open by

pressing the button and close after

the set time interval has elapsed.

The output contact will close by

pressing the button.

The output contact will close by

pressing the button.

The output contact will switch to

the opposite position with each

press of the button. If the contact

was closed, it will open and vice

versa.

The output contact will open by

pressing the button and close after

the set time interval has elapsed.

Button Close Switch oﬀ

Impulse relay Delayed return Delayed start

1x press 2x press 3x press

4x press

5x press 6x press

rogram.

mode

rogram.

mode

rogram.

mode

by installing the actuator under the existing button, we achieve further lighting control options when

using RF Control wireless transmitters or the RF Touch touch screen unit. It is thus possible to control the

actuator by an existing button, but also by a wireless controller

the switching actuator serves for controlling appliances, lights, heating, garage doors, sockets, etc.

function of a multifunction actuator: button switch on/o , impulse relays, delayed return, delayed start

programming and manual control ON/OFF are performed using the Prog button

the switching actuator RFSAI-61B can be controlled by up to 32 channels, including external input

the external button must be potential

free signaling of the device status by LED on the front panel

designed for use in an installation cabinet (ex. KU-68)

CONTROL ELEMENTS

RF receiver: Switching actuator with external input RFSAI-61B

rogram.

mode

rogram.

mode

rogram.

mode

Neutral conductor

Phase conductor

Device status

indication

Output contact relay

Programming button

(manual control ON/OFF)

Terminal for connecting

an external button

Connection

Example of use

*For more information, see p. 48

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 51 52

Komentarze do niniejszej Instrukcji

Brak uwag

Elko eLAN-RF-003 Instrukcja Obsługi Strona 38

Komentarze do niniejszej Instrukcji